Benchtop Rotors
Beckman Coulter SW 32 Ti Swinging-Bucket Rotor Package (32,000 rpm, 175,000 xg)
Beckman Coulter SW 32 Ti Swinging-Bucket Rotor Package is a titanium rotor assembly designed for high-speed ultracentrifugation applications, providing high g-force capability for preparative separations and flexible tube configurations.
- Maximum speed of 32,000 rpm.
- Maximum relative centrifugal force of 175,000 xg.
- k-factor 204.
- Accepts 6 x 38.5 mL or 25 x 89 mL tubes.
- Nominal capacity of 231 mL.
- Titanium construction for high strength and corrosion resistance.
- Package includes rotor assembly, buckets, seals, lubricant, overspeed disks, and O-rings.
Trajan Scientific VICI Valco Rotor Cheminert 6 Port Injection 0.40mm (VAL.C2-20R6) For PAL.VLV6
VICI Valco Rotor For PAL.VLV6 [VICI Valco PN: C2-20R6]Stator PN: VAL.C-2C06 (NEW LPP PN: VAL.C2-20R6). Made in the USA.
Perkin Elmer US LLC Replacement Rotor for 1/8 6-Port Valve, Temperature T
The T type rotor material is designed for use in high-temperature applications, requiring the valve to be at or above 300°C. In order to seal properly and turn easily, after installation, the rotor should be temperature conditioned by brining the valve assembly to 325°C and cycling the valve (on-off) 10 times. The temperature of the valve then can be set according to the requirements of the user.
Trajan Scientific VICI Valco Rotor Valco F/ 4 Port Dual Internal Loop 0.5/1L (VAL.SSACI4W.5/1)
VICI Valco Rotor For 4 Port Valve 0.5 or 1-¿L Internal Loop For 100.LC42S. [VICI Valco PN: SSACI4W.5/1] (NEW LPP PN: VAL.SSACI4W.5/1). Made in the USA.
Perkin Elmer US LLC Replacement Rotor for 1/16 10-Port Valve, Temperature T
The T type rotor material is designed for use in high-temperature applications, requiring the valve to be at or above 300°C. In order to seal properly and turn easily, after installation, the rotor should be temperature conditioned by brining the valve assembly to 325°C and cycling the valve (on-off) 10 times. The temperature of the valve then can be set according to the requirements of the user.
